您当前的位置:  产品中心

多功能异形石材磨边机石材直线曲线磨边花边加工

SYM-10/10B/10D系列多功能石材磨边机主要用于直线、曲线的磨边、及内外花边的加工

双头重型凿岩机

双头重型凿岩机
应用
用于石材矿山的垂直、水平、倾斜凿排钻孔
是机械开采矿山,与金刚石绳锯机配合作业
的理想设备
适用于任何一种石材矿山
主机优势
只采用压缩气体为动力来源,安全可靠
可同时钻两个孔,提高了工作效率
操作简单,易于掌握

四头重型凿岩机

特点
可一机多用,具有垂直、水平、倾斜三种作业功能
该机采用链轮、链条推进,可自动钻进, 提升速度快
底座采用万向转动结构,可以任意方向钻孔
专用楔块固定,操作简便,实用性强
该机可配置不同规格直径的凿岩钎头,可根据需要
更换,凿孔速度快,精度高
润滑系统配备压力表,手动换向,安全可靠,确保了
钻机正常安全使用
底座采用升降支架,可任意调整高度,以适应不同的
作业环境

花岗岩金刚石锯片

Application: For cutting the edges and small blocks of granite, fast and smooth cutting without edge breaking.
用途:用于花岗岩切边和荒料切割,切割平整,不崩边
Quality available: High, Medium, Economic
质量等级:可以根据客户要求定做。

大理石刀头

Application: For cutting all kinds of marble, travertine, onyx or others soft stone
用途:用于切割各种花岗岩,大理石,玉石等
Features: Made under vacuum sintered process; it is sandwich design, using the premium quality raw materials to make the segments. It can cut up to 2.5m-deep-slab. It is fast cutting, long lifespan.
特征:真空烧结,三明治设计。可以切深2.5米以上。板面平整。

矿山锯刀头

It is suitable for granite, marble basalt, slate, sandstone quarrying.
适合 花岗岩、大理石、玄武岩、页岩、砂岩等的石材开采切割.

Good Sharpness: speedy cutting, low current of the machine, mining blocks are square with good flat surface
锋利度高:切速快,机台电流低,开采荒料平整;

Long Life: Reducing the times of blanks re-welding, maximizing the lifespan of steelblanks, achieving high cutting linear meters and eventually saving the mining cost for the quarry owners.
寿命高:减少锯片基体的复焊次数、最大限度增加锯片基体的使用寿命,而且切割米数高,从而节省矿山企业的开采成本;

Diamond Segment 金刚石刀头

Application: For cutting all kinds of granite,marble, limestone, sandstone and etc
用途:用于切割各种花岗岩,大理石,石灰岩和砂岩等
Quality available: High, Medium, Economic
质量等级:可以根据客户要求定做。
It is suitable for bridge cutting machine and single arm cutting machines. Different shapes such as "K", "M" shapes are available, these special shapes makes fast diamond exposed and high cutting efficiency; features of our segments: Fast cutting speed with good life and stable performance.


铜垫圈

M14*20*1,M12*16*1,M10*14*1,M8*14, M16*22*1, M8*12*1,M6*10*1,M5*9*1
铜垫圈,可以接受特殊定制要求